Please visit www.heathservices.com.au for our new website
Please visit www.heathservices.com.au for our new website

Archive for month: June, 2016

Diesel Compressors SMAC 40D

40CFM DIESEL AIR COMPRESSORS,
THAT YOU CAN TRANSPORT ON THE BACK OF YOUR UTE …

smac40d_diesel_compressors

THE SMAC 40D-15HP DIESEL COMPRESSOR IS NOW AVAILABLE THROUGH HEATH PIPELINE SERVICES

Manufactured by MEA, the SMAC 40D is a diesel, rotary screw, air compressor, which provides a reliable source of compressed air to drive various pneumatic tools, including:

  • Impact wrenches
  • Arc air welding
  • Nut runners
  • Grinders
  • Valve pumps
  • Industrial tyre inflation capabilities
  • Jack hammers

Six models are available allowing you to use your SMAC 40D as a compressor, generator, welder, battery charger or jump starter.

mea_smac40

SMAC 40D IMPORTANT FEATURES …

Powered by a 2-cylinder KUBOTA Z602 engine and Rotor Comp NK31 Air End, the SMAC 40D compressor will bring power and reliability to your service capability. With the flexibility to drive a wide range of pneumatic tools the SMAC suits all applications.

Manufactured using steel and protected with a powder coated finish the SMAC is extremely sturdy. Coupled with the reliability of the Kubota engine, German designed and manufactured air end and Sincro quality generator and welder options the SMAC is one of the most durable products in the market.

With diesel reliability, low emissions and fuel efficiency the SMAC is suitable for most site regulations. Not only this, the 1.6 LHR @ 100 % load, 100% duty cycle (Air on Demand) and an eco cooling system makes the SMAC highly efficient.

A variety of models are available including:

  • SMAC 40D (40CFM-145 PSI) Compressor
  • SMAC 40D-G-50Hz (40 CFM-145 PSI) Compressor, Generator
  • SMAC 40D-WG-50Hz (40 CFM-150 PSI) Compressor, Welder, Generator,
    SMAC 40D (40CFM-145 PSI) Fuel & Battery Module
  • SMAC 40D-G-50Hz (40CFM-145 PSI) Fuel & Battery Module
  • SMAC 40D-WG-50Hz (40CFM-145 PSI) Fuel & Battery Module
  • SMAC 40D-5 in 1-50Hz (40CFM-145 PSI) Compressor, Generator, Welder, Jump Starter 330AMP, Battery
  • Charger (12v,24v,36v,48v)
  • SMAC 40D-5 in 1-60Hz (40CFM-145 PSI) Compressor, Generator, Welder, Jump Starter 330AMP, Battery Charger (12v,24v,36v,48v)

The SMAC’s compact and lightweight design will minimise your maintenance costs and is ideal for those who want the power without the payload

Sealweld Total-Lube #911 lubricant & sealant for worn valves, minor leakage

SEALWELD TOTAL-LUBE #911 IS A LUBRICANT AND SEALANT SUITED TO WORN VALVES DISPLAYING MINOR LEAKAGE

Sealweld_valve_care_products

Sealweld Total-Lube #911 provides an insoluble film of lubricant to protect seal faces and reduce torque requirements.

Microscopic particles of PTFE will seal minor scratches to sealing surfaces and shallow corrosion pits. Total-lube #911 seals scratches up to 0.010\” and nicks and cuts on soft seats. Designed specifically as an all-purpose seat lubricant/ sealant to extend the maintenance interval in severe service and critical service valves.

Sealweld Total-Lube #911 is insoluble in water, oil, natural gas and related by-products.

It is suitable for sour service valves, recommended for use in ball, gate, and plug valves as well as orifice fittings.

Sealweld Total-Lube #911 is used at refineries, wellheads, pump or compressor stations and in gas distribution systems

DO YOU NEED VALVE CARE TRAINING?

valve_pro

Sealweld Equa-lube Eighty light, synthetic, valve lubricant

SEALWELD EQUA-LUBE EIGHTY IS A LIGHT SYNTHETIC LUBRICANT WHEN COMMISSIONING NEW VALVES

Sealweld_valve_care_products

An insoluble film of lubricant to protect critical seal faces for valves and reduce torque requirements …

Inject Sealweld Equa-Lube Eighty immediately after the hydrostatic test at the valve factory or repair facility to extend valve service life. This will purge all test water from the seat pockets where corrosion commonly occurs.

Equa-lube Eighty protects against damage from pipeline contaminants, such as dirt, sand, line scale and welding slag at start-up.  It is insoluble in water, crude oil, natural gas, condensate and related by-products.

Sealweld Equa-lube Eighty is recommended for use in new valves, wellhead valves, at refineries, pump and compressor stations and in gas distribution systems

DO YOU NEED VALVE CARE TRAINING?

valve_pro

Sealweld Valve Cleaner Plus

SEALWELD VALVE CLEANER PLUS CLEANS VALVE SEAL FACES AND INTERNAL SEALANT PASSAGES

Sealweld_valve_care_products

A non-hazardous, environmentally friendly product, specifically designed to clean valve faces and internal sealant passages …

Valve Cleaner Plus is not a sealant, it is a combination of solvent and semi-synthetic lubrication oils. Formulated to be injected directly into the seat sealant system to clean important seal faces and sealant passages. Cycle the valve (if permitted) to ensure complete coverage, to allow the valve cleaner to soften old sealants and remove residual build-up from seal points. Valves with severe or persistent leakage may require more wait time. The best results are achieved by displacing the valve cleaner with equal quantities of lubricant/ sealant after cleaning. Recommended for use in ball, gate or plug valves and orifice fittings.

Valve Cleaner Plus is suitable for use at refineries, wellheads, pump or compressor stations and in gas distribution systems.

Valve Cleaner Plus is non-flammable, non-carcinogenic and does not deplete the ozone

DO YOU NEED VALVE CARE TRAINING?

valve_pro

VALVEPRO VALVE CARE TRAINING SYLLABUS

ValvePro® Certified Valve Maintenance Technician – 2016 Syllabus

valvePro1

VALVEPRO® TRAINING – 2016 AUSTRALIA – VALVE CARE & MAINTENANCE

The “ValvePro® Certified Valve Maintenance Technician” training program is designed to certify maintenance and technical personnel responsible for the operation of lubricated plug, ball and gate valves.

ValvePro was developed in response to the large number of skilled and knowledgeable technicians that had left the petroleum work force. Between layoffs, retirements and amalgamations, the pipeline industry has been left with a short supply of in-house valve experts. New workers face significant risk. Public safety is increasingly threatened as existing pipeline systems age.

New valves need to be properly commissioned and existing ones need to be properly maintained. ValvePro shares its vast knowledge of the latest technologies, equipment and valve care products designed to prolong the service life of lubricated valves. It will also teach students the fundamentals of new valve commissioning and methods of troubleshooting valve integrity issues. Fugitive emissions from leaking valves can force unscheduled shutdowns. Performing regular maintenance while valves are inline and under pressure  helps mitigate these shutdowns and saves the company from lost revenue.

The procedures exist, the products work, and the investment in training is invaluable.

The “ValvePro® Certified Valve Maintenance Technician” program is a collaboration with the University of Texas – Petroleum Extension Service (PETEX). The course provides the knowledge and skills for pipeline personnel to safely perform a variety of valve commissioning and maintenance procedures and systematic methods of troubleshooting valve integrity issues.

Course Description

This training program is a two part course utilizing both self-study and hands-on training to obtain certification. The self-study portion is done at the student’s own pace using an interactive, online platform. The second portion is a three day seminar that incorporates both instructor-led classroom exercises and hands-on instruction. Classes are held at one of our training facilities or on-site at your location to certify each student is competent to work on valves.

After successful completion of the program, students will be awarded with a “ValvePro® Certified Valve Maintenance Technician” certificate issued by PETEX.

Course Overview

The “ValvePro® Certified Valve Maintenance Technician” Training program is delivered in two separate modules – an interactive online module and a three day instructor-led classroom module.

The online module provides theory and procedures presented throughout four different levels:

  • Level 1 – Valve Basics
  • Level 2 – Valve Commissioning
  • Level 3 – Valve Inspection and Maintenance
  • Level 4 – Troubleshooting

Before taking Level 1, student are required to complete a “Basic Skills Evaluation” consisting of eight question from each level. This test is then repeated once students have passed all four levels.

  • Level 1 – Valve Basics begins by defining what an “Abnormal Operating Condition” (AOC) is and the common AOCs that apply to valves and valve fittings. AOCs are pointed out and identified throughout all four levels. Valve Basics then describes how valves function and seal, and the different methods used to test valve integrity. The sections in this level include: common lubricated and non-lubricated valves, actuators/operators, fittings and adapters, valve care products, injection equipment and hoses.
  • Level 2 – Valve Commissioning includes: valve delivery, fitting and valve inspection, pre-lubrication, installation, hydrostatic testing, final preparations, portable jumper assembly and stem extension winterizing.
  • Level 3 – Valve Inspection and Maintenance includes: valve site surveys, body cavity depressurization techniques and preventative maintenance and servicing on ball, gate and plug valves.
  • Level 4 – Troubleshooting includes: causes of valve stem and seat leaks, fitting leaks, seized and stiff valves, filling a body cavity, actuators/operators and specialized equipment.

Students must complete a multiple-choice test after completing each level and achieve 75% or higher to pass. All test questions are randomly selected from a database containing over 500 questions. All tests and results are maintained in a database and incorrect answers can be reviewed by the student after completing each test.

The instructor-led module provides theory and procedures and includes:

  • A quick review of the online module
  • An assessment of the student’s roles and responsibilities
  • The operation of hand and power-operated injection equipment.
  • High-pressure gauge reading techniques
  • Fitting and adapter identification and applications
  • Maintenance and troubleshooting the most common valves
  • Identification of actuator and gearbox basics

Student Testing

The review of the online module includes a Q&A discussion to verify that all students fully understand the content and to clear up any concerns the student may have.

The student assessment allows the instructor to tailor the class topics to the student’s specific needs. For example, if students are primarily with a distribution company, the scope of the class will be more focused on the types of valves most common to their application. Likewise for those who work more with mainline pipelines and liquid or gas services. Typically, the valves operate and function the same but the procedures may vary slightly.

The instructor gives a hands-on demonstration of the operation and loading procedures of common hand and power-operated injection equipment with emphasis on safety. This includes understanding why a high-pressure gauge is needed, what the gauge is indicating and to understand what injection pressures are safe.

The fittings and adapters portion provides students with hands-on samples from various manufacturers and for many different applications. The instructor demonstrates how some of these adapters are used and in what situations. The samples are used to help students identify dangerous, low-pressure fittings and obsolete designs.

The maintenance and troubleshooting portion is used to review these topics from the online module and provides students with actual hands-on experience in the lab. Low-pressure air is used to simulate a natural gas pipeline and teaches students to service valves in pressurized conditions. Lubricated ball, gate and plug valves are used in the lab.

All students must demonstrate their knowledge, skills and competency to the instructor under live or simulated conditions. In situations where the instructor goes to the student’s facility, actual field equipment must be readily available when it is not practical or feasible to provide one of our portable labs.

Delivery Mode

The ValvePro online training module is an easy-to-use, Adobe Flash-based application that will run with most Windows browsers such as Internet Explorer, Google Chrome and Firefox. Some students have had success using tablets with a browser application called Puffin. Other apps may be available but must support Adobe Flash Player. Not all browsers are the same version and some firewall settings may prevent this application from functioning properly. We continue to strive to overcome these obstacles.

The instructor-led module is ideally taken at one of our training facilities, however, a portable lab is available should an alternative location be requested. The classroom session focuses on practical exercises, simulation, practice and testing on relevant equipment. The instructor’s time alternates between theoretical and practical lessons. Interactive participation is highly encouraged.

Duration

The online module content and testing typically takes a student between 20 to 30 hours to complete depending on the student’s comprehension and experience level.

The instructor-led module is a three day session with breaks and lunches. The delivery time is based on a class of twelve students. The actual delivery time may be shorter if class size is smaller.

Purpose

This program helps to ensure individuals that perform service work on valves, inline and under pressure, are qualified to operate in a safe and effective manner. We work hard to assure technicians make safety their highest priority.

Target Group

This course is intended for anyone seeking a career as a pipeline valve maintenance technician and for existing technicians who wish to enhance their skills or become ValvePro certified. Individuals who are involved in pipeline construction, design, purchasing or engineering can also benefit from the vast knowledge base this program has to offer.

Pre-requisites

Individuals only interested in the online module require a computer or other device with a minimum resolution of 1024×768. A high speed internet connection is a must in order to view videos and animations throughout the course material.

Individuals interested in becoming a “ValvePro® Certified Valve Maintenance Technician” must first:

Sealweld Ball Valve Sealant #5050

SEALWELD BALL VALVE SEALANT #5050 PROTECTS SEAL FACES AND REDUCES TORQUE REQUIREMENTS

Sealweld_valve_care_products

Specially processed particles of PTFE will seal scratches to sealing surfaces up to 0.030″

 #5050 for ball valves will not harden or plug off conventional giant buttonhead sealant injection fittings.

#5050 is ideal for use in natural gas, water, oil, and related by-products. Use in ball, gate and plug valves, orifice fittings, valve stems and seat seals with minor to severe leakage problems. Use at refineries, wellheads, pump or compressor stations and in gas distribution systems. Suitable for crude oil, sour gas, CO2, water/ brine solutions, and refined petroleum product pipelines.

For best results, first inject Sealweld Valve Cleaner Plus, then leave in the valve for 30 – 40 minutes (up to 8 hours for problem valves). Purge the system with Sealweld Total-Lube #911. Inject Ball Valve Sealant #5050 if Total-Lube #911 fails to hold a reliable seal. #5050 ball valve sealant is also available in heavier grades for severely leaking valves and emergency valve sealing conditions.

This product is available in a wide range of extra heavy grades with increasing amounts of PTFE.

DO YOU NEED VALVE CARE TRAINING?

valve_pro

VALVEPRO VALVE CARE MAINTENANCE TRAINING PROGRAM

VALVEPRO® TRAINING – 2016 AUSTRALIA – VALVE CARE & MAINTENANCE

valve_pro

LIMITED AVAILABILITY FOR 2016 – EXPRESS YOUR INTEREST

Heath Pipeline Services and exclusive supplier Sealweld (from Canada) are now seeking expressions of interest for the very highly regarded ValvePro® Valve care training course to be run later this year in Australia.  Schools will be running in late October – early November, throughout Australia.  AVAILABILITY will be limited. 

THE MOST COMPLETE VALVE CARE TRAINING IN THE INDUSTRY

ValvePro® is a training program designed to help students acquire advanced knowledge of valve components and functions, and to practice hands-on skills to properly maintain valves and increase overall pipeline integrity. ValvePro® graduates will gain the knowledge and skill set to increase valve life span, reduce fugitive emissions and optimize efficiency at their facility will also benefit from enhancing their awareness of potentially hazardous situations and improving work practices.

Preventative valve maintenance, when performed regularly by skilled individuals, can mean the difference between optimal operation of your facilities or pipeline and an unscheduled shutdown.

Because every second of downtime means lost revenue, the ability to safely service valves that are inline and under pressure, without a shutdown, becomes essential to any operator whose goal is to run their facility as safely, efficiently and profitably as possible.

The “ValvePro® Certified Valve Maintenance Technician” course is intended for anyone seeking a career as a pipeline valve maintenance technician and for existing technicians who wish to enhance their skills. Individuals involved in pipeline construction, design, purchasing or engineering can also benefit from this program.

The ValvePro® course is comprised of an online component (approx 20 – 30 hours) and hands-on 3 days class room training.

If you think you or a colleague could benefit from attending the Sealweld ValvePro® Certified Valve Maintenance course please contact us to express your interest, click here.  We will contact you will dates, locations and costing information.