PID GAS DETECTORS – GMI PS500

The GMI PS500 can be tailored to detect up to five gases with its toxic and catalytic sensors, photo ionisation detectors and infrared capabilities. ‘Plug and Play’ option allows the customer to ‘plug in’ a new board with a different gas range.

The PS500 is particularly useful in noisy environments, featuring a very loud (95dBA) penetrating and distinctive audible alarm together with high visibility large area visual alarm. Pump, diffusion or both together, allowing pumped sample for pre-entry checking and diffusion in confined space working, thus maximising battery life. A robust, moulded, rubberised casing guaranteeing Hi-Impact resistance, the PS500 can be used in the most demanding environments.

A PID sensor is available. This device is suitable for landfill surveying.

KEY FEATURES

Over 15 plug-and-play smart sensors to choose from
Wide range of VOC’s with 2 different PID sensors
Flexible configuration to suit your specification
Piercing 95 dB audible plus 360-degree high visibility light bar
On-board datalogging for calibration certificates, data management and event logging
High impact rubberised case
IP65

AVAILABLE SENSORS

The following sensors are available for your GMI PS500.

Ammonia (NH3) · Carbon Dioxide (CO2) · Carbon Monoxide (CO) · Chlorine (CL2) · Flammable (LEL) · Hydrogen Sulphide (H2S) · Infra-Red Flammable (IR LEL) · Nitric Oxide (NO) · Nitrogen Dioxide (NO2) · Oxygen (O2) · Phosphine (PH3) · Sulphur Dioxide (SO2) · Volatile Organic Compound (VOC)

DOWNLOAD A BROCHURE

PS500 Product Brochure (English) (1.99MB)

TECHNICAL SPECIFICATIONS

Measuring Ranges

CO	0 – 1000ppm
O2	0-25%
CO₂	0 – 5% VOL
Dual Toxic CO / H₂S	0 – 1000ppm (CO) 0 – 100ppm (H₂S)
H₂S	0 – 100ppm
LEL	0 – 100% LEL

**15 plug-and-play smart sensors to choose from (please refer to datasheet)**

Certification

IEC	EEx iad IIC T3/T4
ATEX	Ex II 2 G EEx iad IIC T3/T4
UL913	Class I, Div 1, Groups ABCD (excludes NDIR option)
MED	(0038/YY) – Module B & E
CE	0518

Comments are closed.